Model
| Model |
Profile Width |
Extruder model |
Motor power |
Max.extrusion capacity |
Calibrating platform length |
| HGMSC-200 |
200mm |
51/105 |
22kw |
100-120kg/h |
4000mm |
| HGMSC-300 |
300mm |
65/132 |
37kw |
150-180kg/h |
6000mm |
| HGMSC-400 |
400mm |
65/132 |
37kw |
150-180kg/h |
6000mm |
| HGMSCD-300 |
600mm |
65/132 |
37kw |
150-180kg/h |
8000mm |
| HGMSC-600 |
600mm |
65/13 or 80/156 |
37 or 75kw |
150-350kg/h |
6000mm |
PVC window profiles making machine detail
PVC Co-extrusion window profiles making process
1,Raw material mixer
Function:Mixing all raw materials together by hot mixer and so then can compound well,then cooling by the cold mixer prevent reaction.
Working process:Automatic loading feeder--6-10min hot mixing--10-15min cooling
In order to avoid pollution, the mixer needs to be alone in a room. In addition, the mixed raw materials can be stored in silos, then transported directly from the silo to the extruder.
2,PVC window profiles extrusion line
Function and working process:
Automatic loading ----Conical double screw extruder +Co-extruder---die mould---calibrator platform cooling----haul off device---Automatic cutting machine---Productus stacker
Special design screw for PVC powd erextrusion,SIEMENS brand motor,famous brand gear box,with automatic loading and feeder
In order to cooling the products well,adopt the cauum pump and water pump,two sets water tank.All parts contact with water are made by stainless steell.
The haul off device clamped the products by the rubber block, then the movement of the rubber block pulls the product forward.
Automatic cutting machine can customized cut the final products at the required length .
It has the functions of measuring cutting and accumulative counting.It adopt with the dust collector avoid pollution.
Carry and support the cutted final product, and then arrange neatly.
Made of stainless steel, the slide rail is equipped with a rubber protective layer.
3,ASA co-extrusion and rubber strip co-extrusion extruder
SJ45/28 for ASA surface co-extrusion,It can get color and grain in one step with the extrusion,save labor.
The ASA color won't fading in the outdoor under sunshine for 10 years.And it is cheaper than laminating .
ASA materials can not only resist degradation, aging, and fading caused by ultraviolet radiation, but also oxidation in the atmosphere and high temperature during processing will not cause decomposition or discoloration. Test results show that the anti-aging performance of ASA is more than 10 times that of ABS.
SJ30/25 for rubber co-extrusion,
It can get the final products with the rubber sealing,it is save labor and cost less.
4,PVC window and door profiles mould
We can design the mold according your requirments,mould material: 3cr17,the special high-quality mold steel
We offer the mold for 60 /65/80/85 series PVC window and doors,the co-extrusion type for ASA surface and sealing rubber.
5,SWP360 Plastic crusher
The crusher used to recycling the waste products ,then cutting them into small flakes.
6,SMW-500 high speed PVC Grinding machine
The high speed PVC grinding machine used to milling the PVC flakes into powder,so the waste PVC products can be recycled use.
7,20HP Water chiller :HANGKANG ANGES brand,Danfoss compressor
Cooling the recycle water which used to cooling the products,
so it can increace the production speed and get good products surface.
8,30A air compressor
Provide the air to the mold,cylinder for haul off device,cutter,and stacker
PVC window profiles application
PVC window series
1 According to the opening method, it is divided into: fixed windows, top-hung windows, middle-hung windows, bottom-hung windows, vertical swing windows, side-hung doors and windows, pulley side-hung windows, pulley windows, side-hung lower doors and windows, sliding doors and windows, sliding side-opening Windows, folding doors, floor spring doors, lifting sliding doors, sliding folding doors, and inverted sliding doors.
2. According to performance, it is divided into: ordinary doors and windows, sound insulation doors and windows, and thermal insulation doors and windows.
3. According to the application part, it is divided into: inner doors and windows, outer doors and windows.
Audited Supplier 
){kind=link}
){kind=link}