| Customization: | Available |
|---|---|
| After-sales Service: | Engineer Oversea Service |
| Warranty: | 12 Month |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Description |
| Material | PVC + wood powder, with accessory material |
| Specification | Width1000mm* thickness<=40 mm (W*T), Length and thickness is according to your requirement |
| production line speed | 0.5-2m/min |
| Output: | 800-1000Kg/h |
| Outline size | 25×2.5×3 L×W×H(m) |
| Weight | 18T |
| Total/Actual power | 300kw/190kw |
| Air consumption | 0.5-1m3/min |
| air pressure | 0.7pa |
| Water cycle | 30-40m3 |
| Power | AC380V3P50HZ |
| Water source | Industrial water, no impurity, with filtration treatment, pressure:0.4Mpa, temperature: 14-25ºC |
| No. | Name | Model | Remarks |
| 1 | Conical Twin screw extruder | SJ-92/188 | equipped with automatic spring feeding machine |
| Mould for WPC door board | 900*30mm | ||
| 2 | Vacuum sizing platform | SZD-6000 | 1 unit |
| 3 | Caterpillar haul-off | SQY-1000 | 1 unit |
| 4 | Traverse cutter | SQG-1000 | 1 unit |
| 5 | Stacker | ST-1200 | 1 unit |
| 6 | Electrical control system |
| Item | Description |
| Screw diameter | ¢92/¢188mm |
| Screw hardness | HV>740 |
| Barrel hardness | HV>940 |
| Screw material | Material:38CrMoALA (From BaoSteel Group) Bimetallic Material: Tungsten Carbide alloy Bimetallic Alloy Brand:American Kennametal Hardness After Hardening&Tempering:HB280-320 Nitrided Hardness:HRC55~58 Nitrided Case Depth:0.45mm-0.7mm Nitrided Brittleness:Less than Grade 2 Surface Roughness:Ra0.4um Screw Straightness:0.015mm Bimetallic Hardness:HRC65 Bimetallic Depth: 2.5 mm |
| Barrel material | Last zone mosaic SKD |
| thickness of nitrogen layer of screw and barrel | 0.4-0.7mm |
| Screw Qty | 2/ pcs |
| Screw length and diameter ratio | 22:1 |
| Screw rotating direction | Converse-direction, outward rotation |
| Barrel heating | cast Al heater |
| Heating power | 6sections, 55kw |
| Barrel cooling | air-blower, 5-section, 250w×4 |
| Air exhaust mode | vacuum exhaust, 3kw vacuum pump |
| Feeding mode | automatically forced convey |
| Feeding motor power | 2.2kw |
| DC main motor | power 110kw |
| Hopper material | stainless steel |
| Spiral automatic loader | 1000kg/h |
| Max. extruding capacity | 500-700kg/h |
| Reducer and distribution box: | Material feeding tank photo: |
|
|
| The whole gear box is of long service life, low noise, and low heating specific reducing device. |
| Item | Description |
| Vacuum pump power | 7.5kw 2 set |
| Vacuum pump power | 5.5kw 1 set |
| Water pump | 5.5KW 1 set |
| Fan blower | 1.5KW 1 set |
| Electric handspike distance | 500mm |
| Adjustment mode | bolt 3-D adjustment |
| Water nozzle material | copper |
| Platform material | stainless steel |
| Sizing platform length | 6000mm |
| Item | Description |
| Haul power | 3kw 2 sets |
| Clamp mode | pneumatic clamp |
| Max traction | 70000N |
| Max peed | 0.3-5M/Min |
| Caterpillar width | 1000mm |
| Rubber block model | model 1000 rubber block |
| Effective clamp length | 3000mm |
| Frequency converter | SIEMENS |
| Item | Description |
| Motor power | 3kw |
| Cutting mode | round saw cutting |
| Saw blade material | alloy steel saw blade |
| Control mode | automatic cycle cutting |
| Max cutting dimension | 1100mm*110mm(W*T) |
| Counting meter cutting, move cutting with extrusion door board | |
| Material | Stainless steel |
| Width*length | 1200mm*3000mm |
){kind=link}